The Gemini GVX-15P 2-Way 15" Active Loudspeaker features a built-in 2-way amplifier assembly with thermal, short-circuit and DC protection. The low frequency amp provides 420 watts RMS while the high frequency amp supplies 80 watts RMS, with a peak handling of 1000 watts (840W + 160W). Despite all this power, the GVX-15P boasts a compact, portable design thanks to its rugged yet lightweight MDF wood construction. Ergonomic recessed handles add to the speaker's portability, while a 35mm pole mount and 8mm flying points enhance setup options, ensuring these speakers are equally effective in any number of fixed installation or mobile DJ applications.
GVX drivers are designed to provide dynamic, uniform sound across the frequency spectrum. The 15" woofer offers rich, powerful lows and low-mids, while the 1.5" wave-guided titanium compression driver provides crisp that don't sound harsh or piercing. For added versatility, the horn can be rotated, allowing you to change the dispersion pattern of 80° x 60° to 60° x 80°, ensuring proper dispersion whether the speakers are mounted vertically or horizontally.
The GVX-15P's rear panel is conveniently equipped with XLR Inputs and pass-throughs, allowing parallel connection of other active systems. Plus, volume and trim controls, along with a high-pass filter provide additional command over your levels and sound. There are even individual LEDs for Limit, Signal and Power. All these features are housed in a lustrous, black enclosure that offers a stylish aesthetic complement to any stage or performance space. And since it's powered, the GVX-15P is ideal for the mobile DJ or gigging musician looking for a less bulky, more streamlined setup, with no additional amps required.
•2-way bi-amplified, optimized active loudspeaker system
•1.5" high output Titanium driver
•15" woofer with 2.5" (63mm) voice coil
•420W RMS LF amplifier, 80W RMS HF amplifier, 1000W peak (840W + 160W)
•Built-in 24dB/octave @ 1800 Hz electronic crossover
•Linear frequency response 50 Hz to 20 kHz
•Thermal, short circuit & DC amplifier protection
•Balanced XLR line input with pass-through XLR connector
•Switch full-range / monitor 100 Hz low cut filter
•Perforated steel mesh grille
•Recessed flush handles
•Water resistant textured black paint
•Flyable, pole mountable, floor wedge-able
|Power Handling||(420 W + 80 W) RMS / (840 W + 160 W) peak|
|Frequency Range||50 Hz to 20 kHz|
|Maximum Sound Pressure Level (SPL)||127 dB|
|Woofer||Woofer Size: 15"
Woofer Magnet: 60 oz
Low Frequency Driver: 2.5" (63.5 mm) voice coil
|High Frequency Driver||High Output Driver Type: Titanium
High Frequency Driver: 1.5"
Horn Dispersion: 80° x 60°
|Connector||Balanced XLR line input with pass-thru XLR|
|Crossover Frequency||1.8 kHz|
|Enclosure||18 mm (3/4"), MDF|
|Finish||Black acrylic lacquer|
|Grille||Perforated steel mesh grille|
|Handles||Recessed flush handles|
|Pole Socket||35 mm (diameter)|
|Dimensions||16.6 x 27.2 x 17.4" (420 x 690 x 440 mm)|
|Weight||72.8 lb (33.0 kg)|